Ask anything? Available Now

Contact Us Now

Request A Call

Immediate Customer Support

Brother Printer
QL 810w Error 3f

Our IT Phone Service providing best Printer Customer Support for HP, Brother, Canon, Epson, Dell, Samsung, Kodak Printers.

How to Fix Brother Printer Model QL-810W with Error 3F?

Brother printers are one of the best printers Manufacturer Company because of their working efficiency, quality prints, performance, and good speed. However, every printer carries its own faults along with its exceptional capabilities and purposes. The problems in Brother Printer can arise due to some technical issues which can’t be controlled by you. Yet, the most common error which can arise in Brother Printer Model QL-810W is error 3F.

If you come across such sort of errors over and over again while using Brother Printer Model QL-810W or any other model of Brother Printer, then here we have mentioned an easy solution for you. But, before that, let’s know the cause behind this error.

Cause behind the Error Code 3F?

The machine does not work due to a paper jam.

The Brother Printer error 3F starts displaying on your machine when there is a problem associated with paper jamming. The reasons are maybe overfilling of the tray, paper not lined up properly, bits of paper stuck somewhere inside, etc. You will be surprised to know that sometimes paper jamming is also known as Ghost jamming.

But, in case, if you are facing the same issue in your Brother Printer Model QL-810W, then don’t you worry about it, just relax and follow the steps written below for the troubleshooting of error 3F.

Reviews of Brother Printer Customer Support Service

Lucy Smith

Maricopa County, Phoenix, AZ

I totally loved their 24/7 customer support service. I was facing Brother Printer Offline Problem continuously. But after their assistance and guided help the offline problem is resolved finally.

Kerin White

Pima County, Tuscon, AZ

Suddenly, my Brother Printer was facing paper jamming issue more often than ever and I had to contact Brother Printer Help Line website. I am proud to say that they are reliable and provide quick assistance always.

Olivia Bread

Harris County, Houston, TX

I am not good with technicalities of my Brother Printer and need assistance more. So, one of my friends introduce me to Brother Printer Customer Support service. And now I get on-site assistance immediately when required.

Gary Shrout

Fort Bend County, Richmond, TX

I got E50 error message in my Brother Monochrome printer. Get to know about Brother Customer Care service, they not only resolved my issue but also provide me with basic knowledge about common printer errors issues and how to fix them.

Syndy Lerry

Richmond County, Augusta, GA

The Brother Printer printing quality of my monochrome printer QL-810W is depleting day by day. The problem got resolved instantly, when I contacted Brother Customer Technical Support.

David Fortin

Coconino County, Flagstaff, AZ

I am impressed by amazing service from Brother Printer Technical Error Customer Service. They resolve the issue of two errors 54 and 57 error code in an hour only.

Fixing Error Code 3f in Brother QL-810W Printer

Step 1: Clear the jam from the outside of the printer
  • You have to clear the jam from the external input tray and output tray (also known as automatic document feeder (ADF)).
  • Now, look inside the entry from paper enters and it’s existed for any jammed paper and then removes them.
  • Also, open the ADF cover and check for jammed paper. If you found any, remove it.

Even if the issue persists, then continue to the next step.

Step 2: Clear a jam from the inside of the printer
  • Take a flashlight and check every internal area for torn paper.
  • Make sure you turn off the printer.
  • You disconnect the power cord or any other cable.
  • Now, remove the jammed paper from the following areas -
  • Open the ink or toner cartridge access area.
  • Move the carriage if needs and then remove any jammed paper.
  • (Note: In some cases of LaserJet printers, you might have to remove the toner cartridge or imaging drum to access the paper jam.)

  • Now simply, close the open doors connect the power cord and other cables.
  • Now, turn on the printer.

Last Step in fixing a Brother Printer Model QL-810W with error 3f

If your Brother printer’s warranty still effective then, you can contact the customer support department to help you deal with the difficultly. They will also support you for other possible troubleshooting procedures. You can call on , if your Brother Printer problem is not solved yet. We are official best Brother Printer Customer Support in USA, Canada and Australia. We have an experience to solve this Brother printer error 3f code in Brother QL-810W .