Brother Printer error code 36

Brother Printer - Scanner error code 36

• First you have to clean the jam from the outside output tray which is known as automatic document feeder (ADF)).
• And, if you found any piece of paper then remove it slowly.

Step 2: Clear a jam from the inside of the printer

• You have to check every internal area of your printer. If you found any paper, then remove it.
• Now simply turn off the printer.
• Simply disconnect the power cord, now.
• Remove the jammed paper from the ink cartridge access area.
• Move the carriage, and if you found any jammed paper, make sure to remove it.

(Note: In cases of LaserJet printers, you have to remove the toner cartridge or the imaging drum to access the paper jam.)

You have to close the open doors, connect the power cord and other necessary cables.

Now, turn on the printer.