Brother Printer error code 33

Brother Printer - Scanner error code 33

• You have to clear the jam from the external input tray and output tray (also known as automatic document feeder (ADF)).
• Now, look inside the entry from paper enters and it’s existed for any jammed paper and then removes them.
• Also, open the ADF cover and check for jammed paper. If you found any, remove it.

Even if the issue persists, then continue to the next step.

Step 2: Clear a jam from the inside of the printer

• Take a flashlight and check every internal area for torn paper.
• Make sure you turn off the printer.
• You disconnect the power cord or any other cable.
• Now, remove the jammed paper from the following areas -

Open the ink or toner cartridge access area.

Move the carriage if needs and then remove any jammed paper.

(Note: In some cases of LaserJet printers, you might have to remove the toner cartridge or imaging drum to access the paper jam.)

Now simply, close the open doors connect the power cord and other cables.